Cable Accessories & Connectors

3M™ Cold Shrink Termination Kit, 69/72, 1 Conductor, 1500 - 3000 kcmil, Outdoor, 350 kV, Tape Shield, Wire Shield, UniShield, JCN, LC 3M is a trademark of 3M; Used under license in Canada. Used with permission in Canada.

Cable Ties - Bar-Lok, 14.5 Inch, Black, Weather Resistant

3M™ Cold Shrink Termination Kit, 5-8kV, 3 Conductor, 2-3/0 AWG (5kV), 4-2/0 AWG (8 kV), Outdoor, 95 kV, Tape Shield, Wire Shield, UniShield 3M is a trademark of 3M; Used under license in Canada. Used with permission in Canada.

3M™ Cold Shrink Termination Kit, 46kV, 1 Conductor, 4/0 AWG-600 kcmil, Outdoor, 250kV, Tape Shield, Wire Shield, Longitudinally Corruagated (LC) 3M is a trademark of 3M; Used under license in Canada. Used with permission in Canada.

TMC2 Cable Connector (For Armoured Cables), 4" Hub Size, Aluminum, 3.7"-4.25", CSA

TMC2X Cable Connector (For Armoured Cables), 4" Hub Size, Aluminum, 3.16"-3.76", CSA

TMC2X Cable Connector (For Armoured Cables), 1.5" Hub Size, Aluminum, 1.30"-1.62", CSA

3M™ Cold Shrink Termination Kit, 5-15kV, 1 Conductor, 700-1500 kcmil (5kV), 600-1250 kcmil (8kV), 500-1000 kcmil (15kV), Indoor, 110 kV, Jacketed Concentric Neutral (JCN), Concentric Neutral (CN) 3M is a trademark of 3M; Used under license in Canada. Used with permission in Canada.

TMC2X Cable Connector (For Armoured Cables), 3" Hub Size, Aluminum, 2.62"-3.25", CSA

Single cast thread eliminates cross-threading UL Listed as a fittings locknut and stand alone rigid conduit locknut UL Listed 514B for grounding for fittings and rigid conduit Meets or exceeds UL requirements for pull through force on all sizes All locknuts are symmetrical and can be assembled from either side Conical flange on either side enters the knockout creating a 360 deg ground path.

Ultraflex Split Loom Polyethylene, 1/2 Inch, Black and Grey Stripe

TMC2 Cable Connector (For Armoured Cables), 3.5" Hub Size, Aluminum, 2.62"-3.25", CSA

Aluminum fitting with a hub size of 1-1/4 in. This fitting will terminate outer jacket diameters from 1.15 to 1.625.

STAR TECK EXTREME® fittings are designed to accommodate a broad range of cables and each hub range overlaps the adjacent hub range, thereby minimizing the possibility of mismatched cables and fittings in the field. Exclusive power-grip provides a grip that’s high up on the cable – not on the first convolution – so precise cable preparation is not critical. Tapered elastomeric bushing - cone shaped to provide a secure tight fit while eliminating cupping of water in vertical installations. Low profile gland nut fits tight spaces. Has grooves for screwdriver installation, and flats for a wrench. Durable and reusable with funnel entry for easy cable insertion. High visibility, red union features twist-on action for easy connection and disconnection. Also serves as mechanical splitter to separate hub from fitting during disassembly.

Cable Ties - Bar-Lok, 4 Inch, Weather Resistant

3M™ Cold Shrink Termination Kit, 5-8kV, 3 Conductor, 2-2/0 AWG, Indoor/Outdoor, Non-Shielded 3M is a trademark of 3M; Used under license in Canada. Used with permission in Canada.

STAR TECK® TCF series silver grip flexible cord and cable fittings for enclosures with arcing or sparking devices. Used in combination with a certified Class I hazardous location sealing fitting.

Aluminum fitting with a hub size of 1 in. This fitting will terminate outer jacket diameters from 0.95 to 1.375.

The ST teck cable fitting is designed to accommodate a wide range of teck cable to insure a watertight seal between cable and enclosure, junction box, control and instrumentation panels in industrial applications. Made of compression ferrule with elastomer seal ring, a grounding spring insure prefect ground continuity. This fitting is machined from copper-free aluminum standard, steel (add to # suffix S), stainless steel (add to # suffix SS) or pvc coated (add to # suffix PVC) for different applications and are UL-CSA approved.

The ST teck cable fitting is designed to accommodate a wide range of teck cable to insure a watertight seal between cable and enclosure, junction box, control and instrumentation panels in industrial applications. Made of compression ferrule with elastomer seal ring, a grounding spring insure prefect ground continuity. This fitting is machined from copper-free aluminum standard, steel (add to # suffix S), stainless steel (add to # suffix SS) or pvc coated (add to # suffix PVC) for different applications and are UL-CSA approved.

3M™ Cold Shrink Termination Kit, 5-35kV, 3 Conductor, 500-750 kcmil (5kV), 350-700 kcmil (8kV), 4/0 AWG-500 kcmil (15kV), 2/0 AWG-250 kcmil (25/28kV), 2-4/0 AWG (35kV), Outdoor, 200 kV, Tape Shield, Wire Shield, UniShield 3M is a trademark of 3M; Used under license in Canada. Used with permission in Canada.

STAR TECK EXTREME® fittings are designed to accommodate a broad range of cables and each hub range overlaps the adjacent hub range, thereby minimizing the possibility of mismatched cables and fittings in the field. Exclusive power-grip provides a grip that’s high up on the cable – not on the first convolution – so precise cable preparation is not critical. Tapered elastomeric bushing - cone shaped to provide a secure tight fit while eliminating cupping of water in vertical installations. Low profile gland nut fits tight spaces. Has grooves for screwdriver installation, and flats for a wrench. Durable and reusable with funnel entry for easy cable insertion. High visibility, red union features twist-on action for easy connection and disconnection. Also serves as mechanical splitter to separate hub from fitting during disassembly.

STAR TECK® TCF series silver grip flexible cord and cable fittings for enclosures with arcing or sparking devices. Used in combination with a certified Class I hazardous location sealing fitting.

TMC2 Cable Connector (For Armoured Cables), 1.5" Hub Size, Aluminum, 1.65"-2.00", CSA